Connect a Micro-Generator

To connect a Micro-Generator to the electricity network, you must follow the steps outlined in the document Conditions Governing the Connection and Operation of Micro-generation. It's useful to read this before you start.

Conditions Governing the Connection & Operation of Micro Generation Policy | View PDF | 111 KB

Note 1: Text in Section 2.2 should now read  “Table 1 below displays the specific Irish Settings” .

Protection settings as per I.S. EN50438:2013 are not acceptable.  New settings were issued in the Oct 2018 edition of Conditions Governing the Connection and Operation of Micro-Generation.

Note 2: I.S. EN50438:2013 has now been withdrawn by CENELEC and replacement standard is now EN 50549-1:2019/AC:2019-04 for which test certificates for inverters should be provided.

Note 3:  The current 'Conditions Governing the Connection and Operation of Microgeneration' Doc-230206-BRL  is being revised and a new version will be issued in the latter half of 2021.

Download Micro Generation Notification form (NC6) or call 1800 372 757

View PDF | 119 KB

Email the completed form to NetworkServicesBureau@esb.ie or post it to:

ESB Networks
DACNC6 Microgen Notifications
New Connections
Sarsfield Road
Wilton
Cork
T12E 367

Do not proceed if you have been notified by ESB Networks (within the specified time-frame) that you cannot proceed with the installation of the micro-generator.

It is your responsibility to ensure that the Micro-Generator is installed by a registered electrical contractor to Safe Electric standards.

The generator (inverter) must comply with EN50549-1 with current Irish settings.  A type Test Certificate for the Microgenerator stating it is compliant with EN50549-1 must accompany your application form.

In order to export surplus electricity for payment, you will need an Import/Export meter.  We will send you a quotation for installing an Import/Export meter.  On completion of the wiring, your Electrical Contractor will submit a validated wiring cert which will be sent to ESB Networks electronically.  

If you do not require an Import/Export meter, please state this on your Application Form.

Installation can start when all of the above conditions have been met.

When the Micro-Generator has been installed and we have received payment for the Import/Export meter along with the necessary Safe Electric electrical certification, we will install the Import/Export meter.

When the meter has been installed, you can contact your Electricity Supplier regarding payment arrangements for any electricity you export to the grid. You will need to have an agreement with your Electricity Supplier to purchase the electricity exported and to supply the electricity imported. Both import and export must be with the same supplier.